After Market Adrenaline

If you are looking online for a used Adrenaline, here are some things to keep in mind. First, there are a few boards out there that are damaged or no longer work properly - be aware. To be safe, get a new one, it comes with a warranty. If you would still like to buy a used Adrenaline then follow this guide.

Remember, we can always test and update any existing Adrenaline to make sure that it is still working properly. Please remember to follow the instructions in the description of the test and tune when sending in your module. If you need any accessories or sensors to get the full potential out of your Adrenaline, you can find all of them in our Accessories page. 

 

When looking to purchase a used Adrenaline look first for the Adrenaline for your year of truck, that the easiest way to make it work. 

ADR1000: 1998.5 -2000 Dodge Cummins with VP44

ADR1001: 2001 Dodge Cummins with VP44

ADR1002: 2002 Dodge Cummins with VP44

ADR1003: 2003-2004 Dodge Cummins common rail

ADR1004: 2004.5-2005 Dodge Cummins common rail

ADR1006: 2006-2007 Dodge Cummins  common rail

ADR1007: 2007.5-2009 Dodge Cummins common rail

 

Navigate to your type of truck by clicking below:

VP44 Trucks 1998.5-2002 Dodge Cummins 

Common Rail Trucks 2003-2009 Dodge Cummins 

 

 

 

VP44 Trucks

Adrenaline's with an ADR1000, ADR1001 or ADR1002 model numbers are all for the VP44 trucks and will work with the other years of VP44 trucks with a bit of modification. Choose your year of truck from the following list to learn what needs to be done.

1998.5-2000 Dodge Cummins

2001 Dodge Cummins

2002 Dodge Cummins

 

 

 

1998.5-2000 Dodge Cummins: 

If you buy an ADR1001 kit or an ADR1002 kit for your 1998.5 to 2000 Dodge Cummins the most obvious piece of equipment you will need to get is the MAP adapter. The map adapter you will need for your truck has a part number of D-7225-2.

98.5-2000-map.png

 

This map sensor adapter will plug in to the main wiring harness into the flat 3-pin Deutsch connector with the red/black, light blue, and dark blue wires that looks like this: 

mainharness-map-connection-raw.jpg

 

If your truck is a 1998.5 or 1999 you will probably need the data-link adapter as well. Most 2000 trucks do not, however, make sure you know where your data-link connection is and what type it is before you decide you don't need the data-link adapter. The data-link adapter is part number D-7225-4. This data-link adapter will adapt from the flat 3-pin Delphi connector to a triangular 3-pin Deutsch connector. The reverse adapter is used on the XZT. 

data-link.png

 

 

This data-link adapter will plug in to the main wiring harnesses data-link connection to adapt it from the flat 3-pin Delphi connection to the triangular 3-pin Deutsch connector. It will plug into this plug of the main wiring harness: 

main-harness-data-link-raw.jpg

The last thing that you need to do is to pull a jumper off of the main board. This jumper sets the voltage on the boost fooler to differentiate between the 1998-2000 MAP sensor and the 2001 and 2002 MAP sensors. The 2001 and 2002 MAP sensors both use the same voltage that differs from the 1998.5-2000 MAP sensor. 

Remove the jumper completely or place it as shown below: 

1998.5-2000-adrenaline-jumper-placement.jpeg

 

 

 

2001 Dodge Cummins

If you purchase an ADR1000 kit or ADR1002 kit for your 2001 Dodge Cummins, you will need the right MAP adapter. The MAP adapter's part number is D-7225-3.

2001-map.png 

This map sensor adapter will plug in to the main wiring harness into the flat 3-pin Deutsch connector with the red/black, light blue, and dark blue wires that looks like this: 

mainharness-map-connection-raw.jpg

 

You will also need to make sure that the jumper is in place on the main board. If your Adrenaline main board is missing its jumper, you can request one when purchasing the MAP adapter directly from Quadzilla and we will include it in the package. The jumper should be placed on both pins as shown below: 

2001-2002-jumper-placement.jpg

 

 

 

2002 Dodge Cummins

If you purchase a ADR1000 kit or ADR1001 kit for your 2002 Dodge Cummins, you will need to change out the MAP adapter for the right map adapter. The correct MAP adapter's part number is D-7225-1.

 2002-map.png

This map sensor adapter will plug in to the main wiring harness into the flat 3-pin Deutsch connector with the red/black, light blue, and dark blue wires that looks like this: 

mainharness-map-connection-raw.jpg

 

You will also need to make sure that the jumper is in place on the main board. If your Adrenaline main board is missing its jumper, you can request one when purchasing the MAP adapter directly from Quadzilla and we will include it in the package. The jumper should be placed on both pins as shown below: 

2001-2002-jumper-placement.jpg

 

 

 

Common Rail Vehicles

Adrenalines with a model number of ADR1003, ADR1004, ADR1006, or ADR1007 all work on the Dodge common rail trucks and with a little modification, can be swapped between model years. VP44 Adrenalines will not work on the common rail truck nor will the common rail Adrenalines work on the VP44 trucks. 

2003-2004 Dodge Cummins - ADR1003

2004.5-2005 Dodge Cummins - ADR1004

2006-2007 Dodge Cummins - ADR1006

2007.5-2009 Dodge Cummins - ADR1007

 

 

 

2003-2004 Dodge Cummins Common Rail

If you purchase an ADR1004 kit, you will just need to send your Adrenaline module in for testing / reprogramming to make it work on a 2003-2004 Dodge Cummins. 

If you purchase an ADR1006 kit for your 2003-2004 Dodge Cummins, you will need to send in your module for testing / reprogramming as well. You will also need to purchase a wire harness adapter to connect to the engine diagnostics data-link port. The part number for the adapter is SMS-4101-2Ai

sms-4101-2a.jpg 

The SMS-4101-2Ai adapter has been lengthened to allow for in-cab installation. If you want to install your Adrenaline in-cab, then you will also need a modified main wiring harness - D-9070-1i.

If you purchase an ADR1007 kit for your 2003-2004 Dodge Cummins, you will also need to purchase the main wiring harness - D-9070-1i which has also been modified to allow for in-cab installation. 

d20-9070-1i.jpg

 

 

 

2004.5-2005 Dodge Cummins

If you purchase and ADR1003 for your 2004.5-2005 Dodge Cummins, you will need to send your module in for testing / reprogramming to make it work on a 2004.5-2005 Dodge Cummins. 

If you purchase an ADR1006 kit for your 2004.5-2005 Dodge Cummins, you will need to send in your module for testing / reprogramming as well. You will also need to purchase a wire harness adapter to connect to the engine diagnostics data-link port. The part number for the adapter is SMS-4101-2Ai

sms-4101-2a.jpg 

The SMS-4101-2Ai adapter has been lengthened to allow for in-cab installation. If you want to install your Adrenaline in-cab, then you will also need a modified main wiring harness - D-9070-1i.

If you purchase an ADR1007 kit for your 2004.5-2005 Dodge Cummins, you will also need to purchase the main wiring harness - D-9070-1i which has also been modified to allow for in-cab installation. 

d20-9070-1i.jpg

 

 

 

2006-2007 Dodge Cummins

If you purchase an ADR1003 or ADR1004 for your 2006-2007 Dodge Cummins you will need to send your module in for testing / reprogramming to make it work on a 2006-2007 Dodge Cummins. You will also need an OBDII cable instead of the data-link/power adapter. The OBD cable has a part number of F-50-0767.  

f-50-0767.jpg

If you purchase an ADR1007 kit for your 2006-2007 Dodge Cummins, you will also need to purchase the main wiring harness - D-9070-1i which has also been modified to allow for in-cab installation. 

d20-9070-1i.jpg

 

 

 

2007.5-2009(+?) Dodge Cummins

 

If you purchase an ADR1003 or ADR1004 or ADR1006 for your 2006-2007 Dodge Cummins you will need to send your module in for testing / reprogramming to make it work on a 2007.5-2009 Dodge Cummins. You will also need an OBDII cable instead of the data-link/power adapter. The OBD cable has a part number of F-50-0767.  We currently don't have this part number listed on our website. We are currently looking for Beta testers for the 2007.5-2009 Dodge Cummins. It is possible that the ADR1007 will also work on Dodge trucks up to 2012, but we haven't tested this yet. If you are interested in helping us test for this module, please contact us

f-50-0767.jpg

You will also need a new main wiring harness part number D20-9070-4. This is currently unlisted, please contact us for purchase of this wiring harness.